10mm-Auto

10mm Ammuntion => Reloading 10mm ammo => Topic started by: cwlongshot on November 07 2021 07:37:01 PM MST

Title: New 200WFN mold coming!!
Post by: cwlongshot on November 07 2021 07:37:01 PM MST
Arsenal 403-200 WFN PC

Was instock!!


I borrowed a MP 402-200 and love it. But for over a year none available.

Looking forward to this one. My first slick sider!!

CW
Title: Re: New mold coming!!
Post by: The_Shadow on November 07 2021 08:35:20 PM MST
Sounds great!   8)
Title: Re: New mold coming!!
Post by: cwlongshot on November 20 2021 03:30:30 PM MST
It seems a good one!!

https://youtu.be/KoIJ0tAaUZ8

https://youtu.be/pkRI7SRrGLA
Title: Re: New mold coming!!
Post by: The_Shadow on November 20 2021 07:07:50 PM MST
Very Nice videos CW!  I haven't jumped on board with the PC process as of yet...
While doing the pull down documentations I did notice the MEPLAT that were at or over 0.320" and 0.330" were posing issues in some firearms.
I also saw them loaded shorter at 1.2420" - 1.2480" to help tipping angle / feeding and magazine fitment.
Title: Re: New mold coming!!
Post by: cwlongshot on November 24 2021 02:37:39 AM MST
My testing checker shows I need to seat these just under 1.200!!!!!  In the Glock bbl I can seat to 1.230. In my KKM I can get 1.215 and in my Lone wolf 1.205. So Thats my seating depth.


I started charges a couple tenths above starting using Power Pistol. Loading 10rnds. (3 in ea G29/G20/G40) My starting charge.... Produced 1380 fps in 6" & 1250 from G29 stock bbl. 2tenths more hit 1400 and started to show pressures in G40 KKM bbl so only 2 was fired I went no higher. So I have thirty + cartritages to pull.

https://youtu.be/xzMzxjuPUU0