Print Page - Load Data

Title: Load Data
Post by: Alabusa on November 24 2022 05:21:19 PM MST

Who has a magic load for 200 coated and Blue Dot. Only looking for a good place to start. I do have a fully supported chamber and know how to work up a load.

Sent from my SM-G986U using Tapatalk

Title: Re: Load Data
Post by: Alabusa on November 24 2022 05:34:15 PM MST

I've been looking thru all of my manuals including Lyman 4th for Cast Bullets and all are hot 40 loadings. (https://uploads.tapatalk-cdn.com/20221125/9b1a347ade29fbade80aa4e3a0c621fe.jpg)

These are the bullets I will be using. They are the 200gr Brass Monkey offering. Will be using new Starline brass and CCI 300s.

Sent from my SM-G986U using Tapatalk

Title: Re: Load Data
Post by: sparkyv on November 26 2022 05:42:21 PM MST

This is the data I've collected and use, Alabusa. Most from published values, some from other trusted sources. Most I've loaded so far is 9.1gr over a 195 grain WFN coated hardcast. It runs 1153fps in my 4" M610. I'm running low on Blue Dot and will increase loads when I get more.

Bull wt.   Blue Dot     Pwder Wt. min   Pwder Wt. max
200gr   Hornady     6.9gr     9.4gr
200gr   Lyman 48th     8.0gr     9.6gr
200gr   Speer     9.4gr     10.5gr
200gr   10mmReloaded     9.0gr     10.0gr

Title: Re: Load Data
Post by: Alabusa on November 26 2022 05:48:50 PM MST

Thanks Sparky for the info.

I'm going to start at 8gr and work up from there. I don't have a fps goal but a good full power load with great accuracy.

Sent from my SM-G986U using Tapatalk

Title: Re: Load Data
Post by: sqlbullet on November 28 2022 08:12:52 AM MST

I just use jacketed data. Expect to reach max velocity at a bit lower charge.

Title: Re: Load Data
Post by: czgunner on December 06 2022 08:23:22 PM MST

Quote from: Alabusa on November 24 2022 05:34:15 PM MST
I've been looking thru all of my manuals including Lyman 4th for Cast Bullets and all are hot 40 loadings. (https://uploads.tapatalk-cdn.com/20221125/9b1a347ade29fbade80aa4e3a0c621fe.jpg)

These are the bullets I will be using. They are the 200gr Brass Monkey offering. Will be using new Starline brass and CCI 300s.

Sent from my SM-G986U using Tapatalk

Are the Brass .monkey bullets hard cast?

Sent from my Pixel 3 using Tapatalk

Title: Re: Load Data
Post by: Kenk on December 06 2022 10:47:24 PM MST

10.4gr BD is my perfect range load for accuracy using 180gr XTP or HAP, so you could adjust from there. If you have any BE-86 around, that works well with 200gr as well

Title: Re: Load Data
Post by: Alabusa on December 07 2022 06:20:49 AM MST

Quote from: czgunner on December 06 2022 08:23:22 PM MST
Quote from: Alabusa on November 24 2022 05:34:15 PM MST
I've been looking thru all of my manuals including Lyman 4th for Cast Bullets and all are hot 40 loadings. (https://uploads.tapatalk-cdn.com/20221125/9b1a347ade29fbade80aa4e3a0c621fe.jpg)

These are the bullets I will be using. They are the 200gr Brass Monkey offering. Will be using new Starline brass and CCI 300s.

Sent from my SM-G986U using Tapatalk
Are the Brass .monkey bullets hard cast?

Sent from my Pixel 3 using Tapatalk

18bhn

Sent from my SM-G986U using Tapatalk

10mm-Auto

10mm Ammuntion => Reloading 10mm ammo => Topic started by: Alabusa on November 24 2022 05:21:19 PM MST