10mm-Auto

10mm Ammuntion => Factory 10mm ammo => Topic started by: 4949shooter on January 18 2014 04:29:14 AM MST

Title: More 10mm For Intercooler...
Post by: 4949shooter on January 18 2014 04:29:14 AM MST
...to test.

http://www.doubletapammo.net/index.php?route=product/product&path=303_301&product_id=50
Title: Re: More 10mm For Intercooler...
Post by: 4949shooter on January 18 2014 04:33:29 AM MST
Okay, so you have your choice of four boxes of the listed ammo. I originally thought the pack included all of the listed ammo.

Too bad..  :(
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 04:38:37 AM MST
  The 230's complete the Doubletap stuff. Nothing left there to test and Buffalo Bore will be done after the 220's. I keep putting feelers out for the old Elite Ammo stuff but no bites.
Title: Re: More 10mm For Intercooler...
Post by: 4949shooter on January 18 2014 04:55:46 AM MST
Well since you said you were running out of 10mm stuff to test.  ;D

Now you are testing 9mm...blechh.
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 05:30:53 AM MST
  When PBR releases the next set... 135, 155 and 220's I will have some testing to do. Keep the search on though  8)
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 05:55:05 AM MST
http://www.bigbearammo.com/10_mm_Ammo_s/111.htm

But nothing over 600lbs  :(
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 06:07:21 AM MST
   I looked over the ammo they carry in my calibers with the 10mm 200gr XTP (1150 FPS) and .44 Mag 300gr Hardcast (1320 FPS) are the only ones worth a look.
Title: Re: More 10mm For Intercooler...
Post by: mt10mm on January 18 2014 06:38:18 AM MST
Quote from: Intercooler on January 18 2014 05:30:53 AM MST
  When PBR releases the next set... 135, 155 and 220's I will have some testing to do. Keep the search on though  8)

Any idea when it will be avaliable?   The PBR you sent me shot great and I am excited to get my hands on this and the new Federal load.
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 06:56:30 AM MST
   I need to ask Anthony again. The 135's he said ASAP, but the 220's were a new thing he took up.
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 07:12:35 AM MST
   I'm glad you liked those. What setup did you fire them out of? Do you have any brass pictures or measurements? Anything funny looking?
Title: Re: More 10mm For Intercooler...
Post by: pacapcop on January 18 2014 07:17:45 AM MST
Any idea on what the 135's and 155's numbers are from PBR?
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 08:00:15 AM MST
In the sheet is the targets Anthony gave me of 1500 and 1400.
Title: Re: More 10mm For Intercooler...
Post by: 4949shooter on January 18 2014 08:52:48 AM MST
When are you putting the Double Tap 230 grain or the chrono?
Title: Re: More 10mm For Intercooler...
Post by: Intercooler on January 18 2014 12:01:55 PM MST
Tomorrow morning.
Title: Re: More 10mm For Intercooler...
Post by: 4949shooter on January 18 2014 01:39:51 PM MST
Quote from: Intercooler on January 18 2014 12:01:55 PM MST
Tomorrow morning.

Cool.

Last time at the gun show in Allentown, I found some vintage 10mm for $5 a box/20. I forget the manufacturer. I was looking for Norma or vintage Silvertip, so I didn't buy it. If I go back in February I think I will buy it if he still has it, and it looks okay to shoot.