10mm-Auto

10mm Ammuntion => Factory 10mm Ammo pull-downs => Topic started by: RDub01 on April 17 2016 01:53:46 PM MDT

Title: SigSauer 180gr V-Crown JHP pulldown
Post by: RDub01 on April 17 2016 01:53:46 PM MDT
(https://i.postimg.cc/zDt34qqp/DSC01671-resized.jpg) (https://postimages.org/)

Cartridge is from Ammo Manufacture:  SigSauer 180gr V-Crown JHP

Muzzle Velocity; Advertised:  1250 fps
Muzzle Energy; Advertised:  624 ft. lbs.

Brass Make/Head stamp: SIG 10mm AUTO
Bullet Make/Weight/Construction/Info: 180gr V-Crown JHP .4000" dia;  .613" long
Actual Weight: 179.9grs
Crimp diameter:  .4210"
C.O.A.L.:  1.247"
Primer:  Nickel color
Case:  Nickel
Powder Description/Positive ID/Type/Charge Weight: Flattened ball; 8.5grs.

(https://i.postimg.cc/VN8NX6Fs/DSC01673-resized.jpg) (https://postimages.org/)

(https://i.postimg.cc/G23hS5NZ/DSC01674-resized.jpg) (https://postimages.org/)

(https://i.postimg.cc/0N0ynstY/DSC01675-resized.jpg) (https://postimages.org/)

(https://i.postimg.cc/P5ZxLZYF/DSC01676-resized.jpg) (https://postimages.org/)

(https://i.postimg.cc/rFDzk7mT/DSC01672-resized.jpg) (https://postimages.org/)


Actual Instrumental Velocity: 1165 fps

(https://i.postimg.cc/RV2hVG6H/Sig-Sauer-180gr-JHP.jpg) (https://postimages.org/)

Shot from a stock Glock 20-SF at 25 yards. Target 5½"

Data taken with an Oehler Model 33. Skyscreens centered 10' from muzzle.

Head expansion;  .4342", .4333", .4334", .4341, .4338"

Velocity is about what one would expect from 8.5grs of propellant.

Title: Re: SigSauer 180gr V-Crown JHP pulldown
Post by: The_Shadow on April 17 2016 03:32:13 PM MDT
Wow Dub01, that is a different loading than the previous 180 gr V-Crown pull-down.
This one appears to be AutoComp.
Hodgdon shows the 180 JHC with 7.7 as 1199 fps 36,000 psi.

I have read that people are having some pressure signs in the newer loads...did you see any pressure signs?
Title: Re: SigSauer 180gr V-Crown JHP pulldown
Post by: RDub01 on April 17 2016 04:18:58 PM MDT
Hey Shadow
I included the head expansion measurements..  They were right up there, to where I would stop if I were working up loads.
Title: Re: SigSauer 180gr V-Crown JHP pulldown
Post by: The_Shadow on April 17 2016 05:08:19 PM MDT
Yep, 0.4340" is a full expansion in my G-20SF and G29 factory barrels...I'll have to test some AutoComp loads to see how they compare.
Title: Re: SigSauer 180gr V-Crown JHP pulldown
Post by: Benchrst on April 17 2016 11:15:03 PM MDT
Saturday's Vcrown testing:

G20 LW 5.15" .4291 1,258 fps 56 degrees
G20 stock 4.6" bl .4337 1,192 fps 76 degrees

I've got Autocomp, maybe I'll ladder up to the V-Crown factory load.
Title: Re: SigSauer 180gr V-Crown JHP pulldown
Post by: Intercooler on April 18 2016 04:19:00 AM MDT
Can I trade for some of these?