I have been wanting to try these for a while now and I see they're loaded in JAG brass.
(https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/23519264_1592479520790074_7660110611595960813_n.jpg?oh=f5463275bf4eecd075200c9215fdccc1&oe=5A8E5252)
That's interesting to see! :o
This is what that guide used to down the Bear charging his clients.
Springfield XD 4" 1092, 1083. Average 1087.5 FPS/ 386 LBS
EAA Elite Limited 4.75" 1112, 1105 Average 1108.5 FPS/ 401 LBS
FYI these would not work in either of my CZ's. They would lock everything up. The bullet would pull out of the casing and lodge in the barrel. Likely due to the tight chambers of CZ's. Not a winning combo. Worked great in my G19.
Hmmm... I ran it in the XD. It measured out to be a tight chamber as well.
Quote from: SPDSR on December 20 2017 06:18:47 AM MST
FYI these would not work in either of my CZ's. They would lock everything up. The bullet would pull out of the casing and lodge in the barrel. Likely due to the tight chambers of CZ's. Not a winning combo. Worked great in my G19.
CZ pistols have the tightest chambers out of any 9mm I have encountered. They also have a short throat. I do not think their chambers are to SAAMI specification.
.
I can't imagine a company like CZ would make chambers not in spec, but they are tight.
That sucks! I want guns that run it all and would seek to make it so!
It's the only round I've found that the CZ's didn't like.