Looking to trade for: cash plus pistol. Thanks!
Polymer Witness full size
Ruger SR22
Walther PK380
Walther P22
Other glocks
Single actions

The barrel is the standard 9x25. I did think about your point (a very good one) as to die adjustment for subsequent loadings, although i had no plans to do so. I titled it improved because my plan is to ream the chamber deeper using a 357 reamer and using non-standard profile bullets in order to make use of the pushed forward shoulder. The c.o.l. was dictated by fully loading a magazine, no issues. Thanks, good and concise questions!

Made up and fired some 9x25 loads today using 357 Sig dies (Fire Forming the case in the process). Worked out well with 125 gr. bullets and 10 grains of Longshot. C.o.l. 1.285" no signs of pressure and surprisingly easy to handle in a G29 with the lwd 2 port barrel.

I've seen some of these pulldowns, but it was a long time ago before I had any plans to get into 9x25. Mainly had searched 10mm pulldowns in the past.
Appreciate the link and all the time you put into documenting your tests!

Really appreciate that info Shadow! I'm using a 2 port LWD barrel in a G29.4 that I just picked up. It looks about a quarter inch longer than stock before the ported section. I was thinking about getting a G29 (previously had a G20), and then ran across this barrel, so bought it and then ordered the gun. The lock up is absolutely perfect. Just used up the last of my 800x, maybe have to pick up more. It worked great in the 357 Sig as a mildly compressed load.

Hi there, looking for some opinions on the 9x25 specifically using Longshot powder. Is 10 to 12 grains the most that can efficiently burn in a 3.8 barrel? Thanks for any responses!

Looking for some help. On the full size polymer witness, are the ejevtion ports the same size, and for tjat matter are the slides the same part. Thanks for any input.

Pm your email when convenient, thanks

Interested in barrel if still available on friday (8th)