Do you have a coupon? Its coming up at the standard price for me.

Sent from my Pixel 3 using Tapatalk

Once I got into real 10mm pressure loads, my ejection pattern changed drastically. 22lb spring works much better.

I'd recommend you grab a 22 & 24 lb recoil spring unless you only plan on shooting weak sauce factory loads.

Sent from my Pixel 3 using Tapatalk

Quote from: blaster on February 21 2023 04:32:50 PM MST
Democrats and anti-gun zealots don't care if its legal or not. they just throw any s^%$ against the wall to see what sticks. problem is, when they have control of the Gov't they can get away with a lot of un-Constitutional crap!

Look at Oregon and Washington. Their recent laws are currently being challenged because they are unconstitutional...BUT, they scree your life up while it's being drug through the courts.

Sent from my Pixel 3 using Tapatalk

Quote from: RJM52 on February 07 2023 04:46:52 PM MST
The first batch of 200 grain LBT hardcast from Montana bullets were loaded with Longshot.

Did function tested but didn't chronograph:
LOA: 1.250
7.8
8.1
8.6

As all checked out loaded up a batch of 8.6 and got the following:

RIA TAC II 4.25":  1210

PARA Elite LS Hunter 6":  1260

G40/4 6' stock barrel:  1231

G40/4 9" LW barrel: 1346

Have since sold the RIA (excellent shooter but didn't like the bull barrel) and replaced it with a SIG Nightmare Carry 4.25" that was originally .357 SIG and now has a Fusion barrel.

Tonight loaded up:
205 grain Lyman FP-PC
205 grain MP FP
200 grain MP Cup Point

All have 8.0 grains of Longshot.

Since my woods load for the .41 Magnum are bullets between 200-250 grains in the 1030-1180 fps range just decided that instead of pushing the 10mm hard, get back a little more followup shot control...

Bob

Are you haveing any issues with a plunk test in your M&P barrel? Mine drop in fine, but need a tiny bit of persuasion to fall out.

Quote from: Markwell on February 14 2023 09:25:34 AM MST
     The best 200gr hard cast bullet we've found is the BHN-22, RNFP/GC from Montana Bullet works. 12.5gr. of A#9 pushes them to 1250fps from our Guncrafter No Name 1911 with the 6" barrel installed.  Recoil is stout but manageable.   

     I could not get 220gr RNFPs to feed reliably, despite changing seating depths. Anyone else have this issue with the 220s?  Have heard it's a common problem with all guns and the 220s. Just a rumor of fact?

Awesome, that's the same bullet I'm trying to load. Any experience with power pistol or Longshot?

My buddy has one. I'm left handed and haven't had a gas issue unsuppressed. The triggers are horrendous.

Sent from my Pixel 3 using Tapatalk

I would only buy OEM Clock parts. 100% of the kits used on the builds I've done or helped with (5 or 6) have had at least one part out of spec or just fail. Just my opinion.

Sent from my Pixel 3 using Tapatalk

Quote from: Jmont on January 09 2023 07:55:24 AM MST
I bought some 200 grain cast from Montana BW. Hadn?t really found hard load book data for them. But thinking ill probably end up in the 8gr. or so range. But starting at 7.5gr for what I have loaded now. What y?all think? I?d like to get around 1150 fps.

Have you shot any of these yet? I've got the same bullets and am getting ready to load some.

Also, I've shot that 180gr fmj and it's been 100% for me. I'm reloading, so I don't shoot a ton of factory stuff.

Quote from: Kenk on January 22 2023 08:59:03 PM MST
GTG ?

Good To Go

SGA is GTG

Sent from my Pixel 3 using Tapatalk

200 grain hard cast, at least 1200 fps should be a good starting point.

Sent from my Pixel 3 using Tapatalk

I'm a life long Kimber hater, so I'd advise against that one.
I really like my M&P 10mm, but if you are only looking for a 1911, I'd go for the Dan Wesson.

Sent from my Pixel 3 using Tapatalk

Quote from: Rooster41 on January 10 2023 03:48:16 PM MST
Looks like I am the odd one. I am running a Burris Fast Fire 3.

If they would get with it and offer shake awake, I would try one.