Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - NewShooter

#1
General Discussion / Re: glock 20c value
April 19 2018 05:23:14 PM MDT
Quote from: Kenk on April 19 2018 10:00:40 AM MDT
I found a new one on Armslist for $775.00

http://www.armslist.com/posts/3799132/nj-handguns-for-sale--rare-nib-glock-20c-gen-3-g3-g20c-10mm-auto-semi-automatic-handgun-compensator-pistol-w--four---15-round-magazines----7
I just checked that listing and it's already sold. The price was $775 obo. Not sure if it sold for an offer or for the asking price though.
I'll say this- $500 for a c seems like a steal
#2
Factory 10mm ammo / Re: Sig Sauer 200-round value pack
November 19 2016 10:16:06 PM MST
Quote from: shamrock12 on November 19 2016 08:50:23 PM MST
Do anyone know if the ammo in their 200-round value pack are packed loosely or do they come with four 50-round boxes inside? It would mean a saving of a few dollars however it would not be worth it if the ammo are packed loosely in a big carton. Thanks

They're packed in 50-round boxes inside.
#3
I know it's an old thread - I was looking for stuff on Armslist here in Ohio, and came across this:

http://www.armslist.com/posts/5775529/cleveland-ohio-handguns-for-sale--iai-javelina-10mm-longslide-custom

This isn't my gun. And it's a little out of my price range at the moment. Okay, maybe more than a little.
#4
Political discussion / Re: Why not Gary Johnson?
July 20 2016 11:59:18 PM MDT
Quote from: Wolfie on July 20 2016 03:15:17 PM MDT
Shadow I will not counter your health insurance as you are the one that pays it. As for mine I was paying $10,000 a year for a family plan in 2000. It went up to $19,000 in Bush's last year and now its a shade under $22,000 with much better benefits.

* * *

Do the math.....

They pay you that much to shill for Hill' in a group that doesn't even have 600 members? What would they have paid you if they thought you were good at this?


Sent from my iPad using Tapatalk
#5
General Discussion / Re: Terrible Tragedy!
June 17 2016 12:06:23 AM MDT
True. For as far as it goes. Your only beef for the passage of the SAFE Act is with the Republican members of the senate committee.

Once the bill was authorized for a vote in the full chambers it would have taken 110% of the Republicans to vote against it in the New York Senate, and 357% of the Republicans in the Assembly to vote against it. Overwhelming odds, to be sure.

The bill was authored by the Democrats, passed overwhelmingly by the Democrats (100% in the Senate and 94% in the Assembly) and signed by the Democrat Governor. From this you take that the Republicans are not supportive of your gun rights.

I don't believe you.

You're a shill for Hill'. Nothing less. A sock puppet, if you will.

And what, pray tell is so great about your master's addition to HR218?

Quote from: Wolfie on June 14 2016 12:00:55 AM MDT
Which party is better?

Hmmmm, Republicans in my state of NY. Voted to approve the SAFE Act, a anti gun law.

When the GOP held all branches under Bush did they pass National Reciprocity?

Heck Obama, yes Obama fixed HR 218.

You can TRUST Republicans, I never will.
#6
General Discussion / Re: Terrible Tragedy!
June 13 2016 11:33:49 PM MDT
Quote from: Wolfie on June 13 2016 09:08:21 PM MDT
I am a Democrat, used to be GOP for a long time. It was either talk radio or baseball in my office between calls. I thought the GOP was better at Foreign Policy, Economics and Family Values.

It was all a lie to get elected to get power to make cash.

Now riddle me this, in the 3 things I mentioned do you think the GOP is better at any?

Why limit it to these three, Batman? Wouldn't it be better to ask something of relevance to the forum? Which of the two is better on securing your second amendment rights?

Sent from my KFTT using Tapatalk HD
#7
General Discussion / Re: Terrible Tragedy!
June 13 2016 08:54:04 PM MDT
Quote from: Wolfie on June 13 2016 05:26:28 PM MDT
They count the border crossings the same way. Just like they count they count unemployment.

They have used the same standard for decades.

Perp was a religious far right conservative nut job.

It amazes me that some people think all Democrats are liberals when that is not the case and the same goes for fools who think all Republicans are conservative.

Conservative Republicans in my state passed strict gun laws, raise my taxes and spend worse than DC liberals.

You argue like a democrat Wolfie. Are you sure Hillary's not your pal?



Sent from my KFTT using Tapatalk HD
#8
General Discussion / Re: Terrible Tragedy!
June 12 2016 10:41:13 PM MDT
You are conflating politics with religion. There is no "far right" in religion. That is a political term only. Your attempt to link the two exposes what you are really trying to accomplish.
Perhaps you can say that all three groups are strictly textual in their religious beliefs. If that is the case, though, query the text to discern why it seems that our modern religious murderers read from one religious text as opposed to the other two.
From the news reports that I've read today, your pal Hillary is already stoking for a gun grab. Is that why you've switched from taking your usual position about gun-grabbing Republicans and are now talking about weak on terror Republicans? Just curious.

Sent from my KFTT using Tapatalk HD
#9
I think that is an example of recklessness. At least in Ohio. Most states statutorily define culpable mental states. Check your laws for what they are in your state.

Interestingly enough, a conviction for misdemeanor domestic violence is not necessarily a disability under Ohio law. You won't be able to buy any new guns from an ffl, but you can still buy from private parties, and the guns you own can't be confiscated because of the conviction. I don't know the specifics of the case before the Supreme Court, but if it's a loser for the 2A it might turn on a similar issue.
#10
General Discussion / Re: Pro second? Better get behind Trump
February 04 2016 11:11:56 PM MST
I can't let you get away with this. Read what Scalia wrote and they'll find him arguing hypothetically. An intellectually dishonest person abused a quote. You're propagating his dishonesty by reciting it here.

What is your purpose in doing that?
#11
I finally got my witness compact to feed properly. My grip hand was exerting enough pressure on the magazine base pad that the magazine was slightly forced down when shooting. This caused the rounds not to feed properly. I loosened my grip slightly, and found that the rounds fed properly every time. Try curling your pinky finger under the magazine. If that fixes the problem, you might be forcing the magazine down when shooting.
Frustration with the gun led me to this. Boy was I surprised when I found out what works for me.
My new problem is that now the replacement slide is showing signs of wear in the recoil spring housing and may be starting to crack again.
#12
I ran a snap cap through my steel compact witness with both a K10 mag and then the standard mags. The barrel was removed. I noticed that the K10 mags fed the rounds up, and they never jammed inside. The standard mags fed the rounds down. Would it be possible to shorten the K10 mag for use so that it fits flush in the magwell?
#13
10mm semi-auto handguns / Eaa witness compact
May 06 2014 08:13:58 PM MDT
Any time. Glad to help.
#14
10mm semi-auto handguns / Re: Eaa witness compact
May 04 2014 09:56:22 PM MDT
First, the good: the gun is pretty accurate in my hands.  I like the trigger. Felt recoil is manageable - just about right.

The not so good: I haven't been able to find magazines that feed properly - no K10 mags for the compact, although the K10 will fit it (just don't load it fully). The owner's manual states right on the cover not to shoot any high-pressure ammo through it, which to my way of thinking means only shoot the factory loads through it. The slide rockets back and forth until you change the RSA setup. I use a Sprinco guide rod with a 19# Wolff spring. As soon as I installed it, I wondered why I waited so long. I have only good things to say about Sprinco. Others use the Hennings cone rod.

The bad: even though I only shot factory loads through mine, the slide cracked in the RSA housing. EAA replaced the slide under warranty, so no complaints about that.

For me, the compact is kind of like an ugly girlfriend - you love her, but you're not sure why.
#15
Off topic area / Re: Have you cut the cable?
March 27 2014 06:40:33 PM MDT
Bought an antenna, amplifier, $500 windows box, Hauppauge tuner card, and two 2-TB drives. Made a DVR for the wife. Made her happy.
Savings paid for the setup in 8 months.
Can't beat it.