Crossfire Ammunition?

Started by Intercooler, October 13 2013 10:07:04 AM MDT

Previous topic - Next topic

DM1906

You have to be careful with these. They fragment and ricochet real bad off steel. I took a frag in my thigh from 40 yds. Right through the Wranglers.
Life's tough. It's tougher if you're stupid. -- The Duke

Intercooler

No steel. Just gel and paper  ;)

4949shooter


Intercooler

The owner phoned me up today.  He wanted to make sure I had a fully supported chamber for the 10's. Nice fellow!


He said a customer is using them for Helicopter Hog hunting. He said he would send me a Chrony shot.

Intercooler


Intercooler

Test gun. Looks like a ported Omega but don't know the length.



4949shooter

Probably 5 inch.

What is that velocity from, the 140 grain load?

DM1906

Quote from: 4949shooter on October 16 2013 01:15:10 PM MDT
Probably 5 inch.

What is that velocity from, the 140 grain load?

It should be the 140. Too fast for a commercial 155.
Life's tough. It's tougher if you're stupid. -- The Duke

4949shooter

Quote from: DM1906 on October 16 2013 01:20:43 PM MDT
Quote from: 4949shooter on October 16 2013 01:15:10 PM MDT
Probably 5 inch.

What is that velocity from, the 140 grain load?

It should be the 140. Too fast for a commercial 155.

Thanks.

Intercooler


Intercooler

Looks like these will be here today. Should be interesting!

Intercooler

  The weather is very nice here and I know the range will be packed. I will be running these with the other calibers in the morning.




Starline brass for this one.

The_Shadow

Those look very interesting...are we going to look inside of one?  It would be nice to see what they are using to drive them  at those numbers and if they meet their claims!
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
NRA Life Member
Southeast, LoUiSiAna

4949shooter

They have the same color "wear" on the tip of the hollowpoint as the old Black Talons had.

Intercooler

 Yup. All three flavors and gel too.


  The Omega looks to be a 6" ported I think. If that is the case, I doubt matching the box rating but I will take the Hunter and see where it falls. My guess is 1475 out of the Pro 4.75".